欢迎访问中国科学院大学学报,今天是

中国科学院大学学报 ›› 2016, Vol. 33 ›› Issue (2): 253-257.DOI: 10.7523/j.issn.2095-6134.2016.02.017

• 中国工程热物理学会2014年多相流年会专栏 • 上一篇    下一篇

喉嘴距对喷射器性能影响的实验研究

陈伟雄, 陈会强, 石朝胤, 王迎春, 种道彤, 严俊杰   

  1. 西安交通大学动力工程多相流国家重点实验室, 西安 710049
  • 收稿日期:2015-03-13 修回日期:2015-07-07 发布日期:2016-03-15
  • 通讯作者: 陈伟雄
  • 基金资助:

    中国博士后科学基金(2014M552441)、国家自然科学基金(51125027) 和陕西省科技统筹创新工程计划 (2013KTCG01-06)资助

Experimental investigation of influences of primary nozzle exit position on ejector performance

CHEN Weixiong, CHEN Huiqiang, SHI Chaoyin, WANG Yingchun, CHONG Daotong, YAN Junjie   

  1. State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an 710049, China
  • Received:2015-03-13 Revised:2015-07-07 Published:2016-03-15

摘要:

喉嘴距是影响喷射器性能的重要结构参数,研究其对喷射器性能的影响对提升喷射器性能有重要意义.本文对喷射器性能进行实验研究,获得不同喉嘴距和运行工况参数下,喷射器性能的变化规律.研究发现:在本实验范围内,喉嘴距对喷射器的临界背压值影响较小,对喷射器引射比影响较大,引射比随喉嘴距的增大先增大后减小.喷射器单相运行时和两相运行时均存在一个最优喉嘴距,最优喉嘴距随低压流体含液量的增大而增大.当喷射器单相运行时,最优喉嘴距为2.8 mm,当低压流体含水量达到0.07 kg/min时,最优喉嘴距为3.6 mm.

关键词: 喷射器, 喉嘴距, 引射比, 临界背压

Abstract:

The primary nozzle exit position (NXP) is one of the important geometrical factors affecting the ejector performance. In the present study, the ejector performance was investigated experimentally for getting the changing rules of the ejector performance with different NXPs and working conditions. The results show that the NXP has little influence on the critical pressure, but has obvious influence on entrainment ratio. The entrainment ratio first increases and then decreases with NXP. Both the two-phase and single-phase ejectors have their respective optimum NXPs. The optimum NXP increases with the water mass flowrate of the low-pressure fluent. The optimum NXP is 2.8 mm in single-phase operation while it becomes 3.6 mm when the water mass flowrate of the low-pressure fluent is 0.07 kg/min.

Key words: ejector, NXP, entrainment ratio, critical back pressure

中图分类号: