欢迎访问中国科学院大学学报,今天是
简报

风力机叶片后掠对径向流动的影响

  • 陈洪胜 ,
  • 石可重 ,
  • 徐建中
展开
  • 1. 中国科学院工程热物理研究所, 北京 100190;
    2. 中国科学院大学, 北京 100049

收稿日期: 2012-05-09

  修回日期: 2012-11-27

  网络出版日期: 2013-07-15

基金资助

国家能源应用技术研究及工程示范项目(NY20110601-1)资助 

Radial flow on aft-swept wind turbine blades

  • CHEN Hong-Sheng ,
  • SHI Ke-Zhong ,
  • XU Jian-Zhong
Expand
  • 1. Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing 100190, China;
    2. University of Chinese Academy of Sciences, Beijing 100049, China

Received date: 2012-05-09

  Revised date: 2012-11-27

  Online published: 2013-07-15

摘要

以NREL Phase VI 实验叶片为基础设计了一种后掠型风力机叶片,通过CFD计算模拟,发现后掠叶片的绕流中存在更复杂的径向流动,主要表现在后掠段吸力面流线在前缘附近向叶轮旋转中心偏转,在尾缘附近向叶尖方向明显偏转. 分析得出,叶片后掠改变了入流状态,使得后掠段吸力面流线在前缘附近向叶轮旋转中心偏转;在尾缘附近,其与离心力和科氏力的共同作用使得流动向叶尖发生明显偏转.

本文引用格式

陈洪胜 , 石可重 , 徐建中 . 风力机叶片后掠对径向流动的影响[J]. 中国科学院大学学报, 2013 , 30(4) : 568 -571 . DOI: 10.7523/j.issn.2095-6134.2013.04.020

Abstract

A swept blade was designed based on NREL phase VI test blade. The CFD simulation results show significant radial flow on the aft-swept blade. The flow around aft-swept section turns to the rotor center around leading edge and turns to blade tip around trailing edge arresting. The analyses indicate that blade aft-sweeping transforms the flow condition, and it turns streamline around leading edge to rotor center and turns streamline around trailing edge to blade tip with coaction of centrifugal force and Coriolis force.

参考文献

[1] Larwood S M, Zuteck M D. Swept wind turbine blade aeroelastic modeling for loads and dynamic behavior[J]. AWEA Windpower, 2006: 1-17.

[2] Ashwill T D, Kanaby G, Jackson K, et al. Development of the swept twist adaptive rotor (STAR) blade[C]//48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition. Orlando, Florida: American Institute of Aeronautics and Astronautics, 2010(1): 1-13.

[3] Ashwill T D. Materials and innovations for large blade structures: research opportunities in wind energy technology[C]//50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Palm Springs: American Institute of Aeronautics and Astronautics, 2009: 1-20.

[4] Maheri A, Isikveren A T. Performance prediction of wind turbines utilizing passive smart blades: approaches and evaluation[J]. Wind Energy, 2010, 13(2/3): 255-265.

[5] Amano R S, Malloy R J. Aerodynamic comparison of straight edge and swept edge wind turbine blade[C]//AIAA Aerospace Sciences Meeting including The New Horizons Forum and Aerospace Exposition. Orlando, Florida: American Society of Mechanical Engineers (ASME), 2008, 5(1): 193-197.

[6] Mandas N, Cambuli F. Numerical prediction of horizontal axis wind turbine flow[C]//Proceedings of the European Wind Energy Conference. Athens,Greece, 2006: 9.

[7] Sørensen N N, Michelsen J A, Schreck S J. Navier-Stokes predictions of the NREL phase VI rotor in the NASA Ames 80 ft×120 ft wind tunnel[J]. Wind Energy, 2002, 5(2/3): 151-169.

[8] Chaviaropoulos P K, Nikolaou I G, Aggelis K A, et al. Viscous and aeroelastic effects on wind turbine blades. The VISCEL project. Part I: 3D navier-stokes rotor simulations[J]. Wind Energy, 2003, 6(4): 365-385.

[9] 李媛, 康顺, 樊小莉, 等. 后掠风力机叶片气动性能及流固耦合数值模拟[C]//中国工程热物理学会2010年流体机械学术会议. 南京: 中国工程热物理学会, 2010.

文章导航

/