欢迎访问中国科学院大学学报,今天是
中国工程热物理学会2014年多相流年会专栏

湍流模型对微通道内空化流动模拟结果的影响分析

  • 崔振东 ,
  • 刘斌 ,
  • 蔡军 ,
  • 淮秀兰
展开
  • 1. 中国科学院工程热物理研究所, 北京 100190;
    2. 中国科学院大学, 北京 100190

收稿日期: 2015-03-13

  修回日期: 2015-05-25

  网络出版日期: 2016-03-15

基金资助

国家自然科学基金(51376181)资助

Analysis of simulation results for cavitating flows in micro-channels using different turbulence models

  • CUI Zhendong ,
  • LIU Bin ,
  • CAI Jun ,
  • HUAI Xiulan
Expand
  • 1. Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing 100190, China;
    2. University of Chinese Academy of Sciences, Beijing 100190, China

Received date: 2015-03-13

  Revised date: 2015-05-25

  Online published: 2016-03-15

摘要

应用4种湍流模型(标准k-ε模型、标准k-ω模型、Transition SST模型和Transition k-kl-ω模型)对微通道内空化流动进行模拟.通过与实验结果对比,分析4种湍流模型在空化流动模拟计算中的预测能力.结果表明:标准k-ω模型预测的流量和空化流型与实验结果最为接近.Transition SST模型和Transition k-kl-ω模型流量预测结果与实验较为吻合,但流型预测误差较大.标准k-ε模型未能预测出空化流动,不适用于低雷诺数下的空化流动计算.

本文引用格式

崔振东 , 刘斌 , 蔡军 , 淮秀兰 . 湍流模型对微通道内空化流动模拟结果的影响分析[J]. 中国科学院大学学报, 2016 , 33(2) : 213 -217 . DOI: 10.7523/j.issn.2095-6134.2016.02.010

Abstract

The cavitation flows in micro-channels were numerically investigated using four different turbulence models, and the models are as follows: standard k-ε turbulence model, standard k-ω turbulence model, Transition SST turbulence model, and Transition k-kl-ω turbulence model. In comparison to the experimental results, the prediction abilities of these turbulence models for the cavitation flow were analyzed in details. The results show that both the flow rate and flow pattern predicted by the standard k-ε turbulence model agree well with the experimental results. Although the flow rates predicted by the Transition SST turbulence model and the Transition k-kl-ω turbulence model also agree well with the experimental results, the predicted flow patterns significantly deviate from the experimental ones. The standard k-ε turbulence model failed to predict the cavitation flow, which indicates that it is not suitable for the low Reynolds number flow circumstance.

参考文献

[1] 王献孚. 空化泡和超空化泡流动理论及应用[M]. 北京:国防工业出版社,2009.
[2] 李贝贝,张宏超,倪晓武,等. 不同环境压强下激光空泡溃灭射流的实验研究[J]. 激光技术,2012,36 (6):749-753.
[3] 马建旭,王立鼎,吴一辉. 微电子机械系统在生物医学领域中的应用[J]. 光学精密工程,1996,4(1):1-6.
[4] 杨拥军. 划时代的MEMS加工技术[J]. 国防制造技术,2009,10 (5):36-42.
[5] Mishra C, Peles Y. Cavitation in flow through a micro-orifice inside a silicon microchannel[J]. Physics of Fluids, 2005, 17 (1): 151-155.
[6] Schneider B, Ko?ar A, Kuo C J, et al. Cavitation enhanced heat transfer in microchannels[J]. Journal of Heat Transfer, 2006, 128 (12): 1 293-1 301.
[7] Mishra C, Peles Y. Flow Visualization of cavitating flows through a rectangular slot micro-orifice ingrained in a microchannel[J]. Physics of Fluids, 2005, 17 (11): 3 602-3 614.
[8] Mishra C, Peles Y. An experimental investigation of hydrodynamic cavitation in micro-venturis[J]. Physics of Fluids, 2006, 18(10): 3 603-3 605.
[9] Fogg D W, Goodson K E. Bubble-induced water hammer and cavitation in microchannel flow boiling[J]. Journal of Heat Transfer, 2009, 131 (12): 315-320.
[10] Hickel S, Mihatsch M, Schmidt S J. Implicit large eddy simulation of cavitation in micro channel flows[J]. Eprint Arxiv, 2014, 132(1): 743-750.
[11] Rooze J, André M, van der Gulik G S, et al. Hydrodynamic cavitation in micro channels with channel sizes of 100 and 750 micrometers[J]. Microfluidics and Nanofluidics, 2012, 12(1-4): 499-508.
[12] Schnerr G H, Saver J. Physical and numerical modeling of unsteady cativation dynamics[C]//Fourth International Conference on Multiphase Flow. New Orleans, Louisiana, USA, 2001.
[13] Wilcox D C. Reassessment of the scale-determining equation for advanced turbulence models[J]. AIAA Journal, 1988, 26(11): 1 299-1 310.
[14] 孙润鹏,朱卫兵,徐凌志,等. 应用Transition k-kl-ω转捩模型对内冷叶片气热耦合的数值模拟[J]. 推进技术,2012,33(2):274-282.
[15] Liu B, Cai J, Huai X L. Experimental study on heat transfer with cavitating flow in copper-based microchannels[C]// The Heat Transfer Symposium 2014. Beijing, China, 2014.

文章导航

/