欢迎访问中国科学院大学学报,今天是
中国工程热物理学会2014年多相流年会专栏

大型循环流化床环形炉膛中气固流动特性的CPFD数值模拟

  • 邱桂芝 ,
  • 叶佳敏 ,
  • 王海刚 ,
  • 王小芳 ,
  • 王法军 ,
  • 孙运凯 ,
  • 聂立
展开
  • 1. 中国科学院工程热物理研究所, 北京 100190;
    2. 中国科学院大学, 北京 100049;
    3. 东方锅炉股份有限公司, 四川 自贡 643000

收稿日期: 2015-03-13

  修回日期: 2015-07-07

  网络出版日期: 2016-03-15

基金资助

国家自然科学基金(61320106004,61374018)和中国科学院战略性先导科技专项(A类)(XDA07030100)资助

CPFD simulation of gas-solids flow in annular combustion chamber of large-scale circulating fluidized bed

  • QIU Guizhi ,
  • YE Jiamin ,
  • WANG Haigang ,
  • WANG Xiaofang ,
  • WANG Fajun ,
  • SUN Yunkai ,
  • NIE Li
Expand
  • 1. Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing 100190, China;
    2. University of Chinese Academy of Sciences, Beijing 100049, China;
    3. Dongfang Boiler Group Co. LTD, Zigong 643000, Sichuan, China

Received date: 2015-03-13

  Revised date: 2015-07-07

  Online published: 2016-03-15

摘要

环形炉膛理论上可有效解决大型循环流化床中二次风穿透不足的问题,其内外环壁面的设计也为更多的受热面提供了充足的空间,是一个具有明显优势的新型炉膛结构.本文使用CPFD数值模拟方法,对循环流化床环形炉膛冷态实验台内气固流动特性进行研究.模拟得到的炉内轴向压力分布和返料流率均与实验结果吻合较好.在此基础上分析炉内气固流动特性以及炉膛出口气固流动不均匀性,研究结果为环形炉膛的设计优化提供有价值的信息.

本文引用格式

邱桂芝 , 叶佳敏 , 王海刚 , 王小芳 , 王法军 , 孙运凯 , 聂立 . 大型循环流化床环形炉膛中气固流动特性的CPFD数值模拟[J]. 中国科学院大学学报, 2016 , 33(2) : 218 -222 . DOI: 10.7523/j.issn.2095-6134.2016.02.011

Abstract

Annular combustion chamber was designed for large-scale circulating fluidized bed(CFB) to improve the secondary air penetration and increase the enclosing heat transfer surface. In this study, the gas-solids flow in a large-scale CFB with annular combustion chamber is investigated based on CPFD simulation. The results show that the pressure distribution and solids flux predicted by the numerical simulation are in good agreement with experimental results. The gas-solids flow behavior and non-uniformity characteristics of gas and solids mass fluxes at combustion chamber outlets are analyzed. The results can be used as valuable information for the optimum design of annular combustion chamber.

参考文献

[1] 吕俊复, 于龙, 张彦军, 等. 600MW超临界循环流化床锅炉[J]. 动力工程, 2007, 27(4):497-501.
[2] 吕清刚, 宋国良, 孙运凯, 等. 690t/h循环流化床锅炉设计特点与运行特性分析[J].动力工程学报, 2010, 30(12):899-903.
[3] 程乐鸣, 周星龙, 郑成航, 等. 大型循环流化床锅炉的发展[J]. 动力工程, 2008, 28(6):817-826.
[4] Hack H, Hotta A, Kettunen A, et al. Ultra-supercritical CFB technology to meet the challenge of climate change[R]. Foster Wheeler Energia Oy, Finland, 2008.
[5] 廖磊, 那永杰, 吕清刚, 等. 六个旋风分离器并联布置循环流化床的实验研究[J]. 中国电机工程学报, 2011, 31(11):11-16.
[6] 周星龙, 程乐鸣, 张俊春, 等. 六回路循环流化床颗粒浓度及循环流率实验研究[J]. 中国电机工程学报, 2012, 32(5): 9-14.
[7] 刘静, 王勤辉, 骆仲泱, 等. 600MWe超临界循环流化床锅炉的设计研究[J]. 动力工程, 2003, 23(1):2 179-2 184.
[8] 孙献斌. 超临界循环流化床锅炉的研发[J]. 热力发电, 2008, 37(1): 1-3.
[9] 聂立, 王鹏, 彭雷, 等. 600 MW超临界循环流化床锅炉的设计[J]. 动力工程, 2008, 28(5):701-706.
[10] 孙纪宁, 王哲, 杨志伟, 等. 裤衩腿循环流化床流动特性及翻床机理的研究[J]. 动力工程学报, 2010, 30(5):336-341.
[11] 李金晶, 李燕, 刘树清, 等. 裤衩腿结构循环流化床锅炉床料不平衡现象的数值模拟[J]. 动力工程, 2008, 28(1):28-32.
[12] 吕清刚, 高鸣, 孙运凯, 等. 大型循环流化床锅炉[P]. 北京:CN102226518A,2011-10-26.
[13] Andrews M J, Orourke P J. The multiphase particle-in-cell (MP-PIC) method for dense particulate flows[J]. International Journal of Multiphase Flow, 1996, 22(2): 379-402.
[14] Snider D M. An incompressible three-dimensional multiphase particle-in-cell model for dense particle flows[J]. Journal of Computational Physics, 2001, 170(2): 523-549.
[15] 王超. 600 MW超临界CFB锅炉炉膛气固流动特性的数值模拟研究[D]. 杭州:浙江大学,2011.

文章导航

/