煤粉颗粒广泛应用于采矿、能源等气固两相传输行业中。在工作过程中，煤粉颗粒之间及颗粒与壁面之间的碰撞与摩擦会产生静电，若不及时放电，会在工作系统中逐渐积累，给安全生产带来很多问题，如煤粉颗粒结团、堵塞和爆炸等危害。此外，气固两相流中煤粉颗粒带电会导致一系列测量问题，严重影响测量精度，甚至损坏仪器等。基于已有单颗粒静电生成的测量实验系统，研究三角形煤粉颗粒的各个因素对静电生成的影响，对诸因素进行比较分析，发现颗粒的长宽比、面积、前冲角、相对湿度及表面粗糙度均对静电有较大的影响，总结煤粉单颗粒静电生成机理及影响因素。
Coal granules are widely used in gas-solid two-phase transmission industries, such as mining and energy. In the industrial process, electrostatics is generated by the collision and friction between the coal granule and between the granule and the wall surface. If it is not discharged in time, it will gradually accumulate in the working system, thereby causing many problems for the safety production, such as granule clustering, blocking, sparking, explosion, etc. In addition, the charged granules in the gas-solid two-phase flow cause a series of measurement problems, which seriously affect the measurement accuracy and even damage the instruments. The main task of this experiment is to establish a measurement experiment system for electrostatic generation of single coal granules,and to study the effects of the physical factors, sliding velocity, environmental relative humidity, surface roughness, and granular materials on the generation of electrostatics. After comparing and analyzing the data, we found that these factors have greater impacts on electrostatics, and a comparative analysis was conducted to summarize the mechanism of electrostatic generation of single granules and the influences of various factors.
[1] 范维唐, 杜铭华. 中国煤化工的现状及展望[J]. 煤化工, 2005, 33(1):1-5.
[2] Watanabe H, Ghadiri M, Matsuyama T, et al. New instrument for tribocharge measurement due to single particle impacts[J]. Review of Science Instruments, 2007, 78(2):024706.
[3] Mazumder M K, Sims R A, Biris A S, et al. Twenty-first century research needs in electrostatic processes applied to industry and medicine[J]. Chemical Engineering Science,2005, 61(7):2192-2211.
[4] 郭健,董克增,黄正梁, 等.煤中伴生矿物的摩擦荷电特性[J].化工学报,2014(10):3776-3782.
[5] 陈拴柱.煤粉荷电机理与试验研究及其计算机仿真[D].哈尔滨:哈尔滨理工大学,2008.
[6] 毕文剑, 李艳, 罗坤, 等. 温度对静电除尘器内颗粒受力影响的数值模拟[J]. 中国科学院大学学报, 2017, 34(2):172-178.
[7] Hogue M D, Calle C I, Curry D R, et al. Discrete element modeling (DEM) of triboelectrically charged particles:revised experiments[J]. Journal of Electrostatics, 2009, 67(4):691-694.
[8] Matsusaka S, Masuda H. Simultaneous measurement of mass flow rate and charge-to-mass ratio of particles in gas-solids pipe flow[J]. Chemical Engineering Science, 2006, 61(7):2254-2261.
[9] Matsusaka S, Miitsuhiro O, Masuda H. Bipolar charge distribution of a mixture of particles with different electrostatic characteristics in gas-solids pipe flow[J]. Powder Technology, 2003, 135:150-155.
[10] Dwari R K, Rao K H. Tribo-electrostatic behaviour of high ash non-coking Indian thermal coal[J]. International Journal of Mineral Processing, 2006, 81(2):93-104.
[11] Yao J, Wang C H. Granular size and shape effect on electrostatics in pneumatic conveying systems[J]. Chemical Engineering Science, 2006, 61(12):3858-3874.
[12] Yao J, Zhang Y, Wang C H, et al. Electrostatics of the granular flow in a pneumatic conveying system[J]. Industrial and Engineering Chemistry Research, 2004, 43(22):7181-7199.
[13] Matsusaka S, Masuda H. Electrostatics of particles[J]. Advanced Powder Technology, 2003, 14(2):143-166.
[14] Guardiol J, Rojo V, Ramos G. Influence of particle size, fluidization velocity and relative humidity on fluidized bed electrostatics[J]. Journal of Electrostatics, 1996, 37(1/2):1-20.
[15] Saleh K, Ndama A T, Guigon P. Relevant parameters involved in tribocharging of powders during dilute phase pneumatic transport[J]. Chemical Engineering Research & Design, 2011, 89(12):2582-2597.
