液态金属偏滤器具有自修复和热负荷能力，因此成为偏滤器的重要设计方案。偏滤器上的液态金属膜流处于磁场和高强度热流下，且装置运行时产生的低频扰动会使薄膜流动发展为毛细孤立波。在毛细孤立波膜流中，波谷位置的毛细分离涡会显著增强该区域的对流换热。研究雷诺数为58的液态锡毛细孤立波膜流在底壁附近的换热现象。结果表明：无外加磁场和自由界面热流时，液态锡毛细孤立波薄膜流动复现了努塞尔数在波谷位置显著增强的现象；仅施加磁场时，由于洛伦兹力的阻尼效应，毛细分离涡处的换热增强效果被抑制；仅施加热流时，由于膜流被加热，总换热量增加，导致努塞尔数分布更均匀；同时施加磁场和热流时，两者的作用会叠加。
With capacities of self-cleaning and sustaining high heat load, liquid-metal divertor is one important design of first wall component. Liquid-metal divertor has to be faced with external magnetic fields and high-intensity heat flux, and in devices, existence of low-frequency disturbances is inevitable, which would make liquid-metal film flows develop into capillary solitary waves, in which capillary separation eddies at wave troughs would strengthen heat convection there. In this research, heat transportation of liquid-tin film flows with capillary solitary waves is studied under Re=58. When there is no magnetic field and free-surface heat flux, capillary solitary waves of liquid tin have same features of water waves and Nu number also reaches peak at wave trough. When only applying magnetic field is exerted, Lorentz force has damping effects on waves and accordingly, the enhancement of heat transfer from capillary separation eddies decreases. When only applying free-surface heat flux is exerted, film flows are heated and distribution of Nu number become more uniform. When applying both magnetic field and heat flux are exerted, their effects will be stacked.
[1] 张一鸣,曾丽萍,沈欣媛,等. ITER计划与聚变能发展战略[J]. 核聚变与等离子体物理, 2013,33(4):359-365.
[2] Abdou M, Morley N B, Smolentsev S, et al. Blanket/first wall challenges and required R&D on the pathway to DEMO[J]. Fusion Engineering and Design, 2015, 100:2-43.
[3] 胡建生,左桂忠,王亮,等. 磁约束核聚变装置等离子体与壁相互作用研究简述[J]. 中国科学技术大学学报, 2020, 50(9):1193-1217.
[4] Abdou M A, Team T A, Ying A, et al. On the exploration of innovative concepts for fusion chamber technology[J]. Fusion Engineering and Design, 2001, 54(2):181-247.
[5] Mattas R F, Allain J P, Bastasz R, et al. ALPS-advanced limiter-divertor plasma-facing systems[J]. Fusion Engineering and Design, 2000, 49/50:127-134.
[6] Zuo G Z, Hu J S, Li J G, et al. First results of lithium experiments on EAST and HT-7[J]. Journal of Nuclear Materials, 2011, 415(1):S1062-S1066.
[7] Zuo G Z, Ren J, Hu J S, et al. Liquid lithium surface control and its effect on plasma performance in the HT-7 tokamak[J]. Fusion Engineering and Design, 2014, 89(12):2845-2852.
[8] Humrickhouse P W. An equation of state and compendium of thermophysical properties of liquid tin, a prospective plasmafacing material[J]. IEEE Transactions on Plasma Science, 2019, 47(7):3374-3379.
[9] Benjamin T B. Wave formation in laminar flow down an inclined plane[J]. Journal of Fluid Mechanics, 1957, 2(6):554-573.
[10] Kapitza P L. Wave flow of thin layers of a viscous liquid[M]//Collected Papers of P. L. Kapitza. Oxford:Pergamon Press, 1965:662-709.
[11] Nusselt W. Der oberflaechenkondensateion des Wasserdampfes[J]. VDI Zeitschrift, 1916, 60:541-546.
[12] Adomeit P, Renz U. Hydrodynamics of three-dimensional waves in laminar falling films[J]. International Journal of Multiphase Flow, 2000, 26(7):1183-1208.
[13] Kunugi T, Kino C. DNS of falling film structure and heat transfer via MARS method[J]. Computers & Structures, 2005, 83(6/7):455-462.
[14] Dietze G F, Leefken A, Kneer R. Investigation of the backflow phenomenon in falling liquid films[J]. Journal of Fluid Mechanics, 2008, 595:435-459.
[15] Cimpeanu R, Papageorgiou D T, Petropoulos P G. On the control and suppression of the Rayleigh-Taylor instability using electric fields[J]. Physics of Fluids, 2014, 26(2):022105.
[16] Schaffer E, Thurn-Albrecht T, Russell T P, et al. Electrically induced structure formation and pattern transfer[J]. Nature, 2000, 403(6772):874-877.
[17] Aksel N, Schörner M. Films over topography:from creeping flow to linear stability, theory, and experiments, a review[J]. Acta Mechanica, 2018, 229(4):1453-1482.
[18] Ni M J. Consistent projection methods for variable density incompressible Navier-Stokes equations with continuous surface forces on a rectangular collocated mesh[J]. Journal of Computational Physics, 2009, 228(18):6938-6956.
[19] Ni M J, Li J F. A consistent and conservative scheme for incompressible MHD flows at a low magnetic Reynolds number. Part III:On a staggered mesh[J]. Journal of Computational Physics, 2012, 231(2):281-298.
[20] Zhang J, Ni M J. A consistent and conservative scheme for MHD flows with complex boundaries on an unstructured Cartesian adaptive system[J]. Journal of Computational Physics, 2014, 256:520-542.
[21] Xie B, Xiao F. Toward efficient and accurate interface capturing on arbitrary hybrid unstructured grids:the THINC method with quadratic surface representation and Gaussian quadrature[J]. Journal of Computational Physics, 2017, 349:415-440.
[22] Liu J, Gollub J P. Solitary wave dynamics of film flows[J]. Physics of Fluids, 1994, 6(5):1702-1712.
[23] 朴明日. 沿波纹壁面下落薄膜流动的动力学特性研究[D]. 上海:上海大学, 2011.
[24] Assael M J, Kalyva A E, Antoniadis K D, et al. Reference data for the density and viscosity of liquid copper and liquid tin[J]. Journal of Physical and Chemical Reference Data, 2010, 39(3):033105.
[25] Davies H A, Llewelyn Leach J S. The electrical resistivity of liquid indium, tin and lead[J]. Physics and Chemistry of Liquids, 1970, 2(1):1-12.
[26] Rindt P. The potential of liquid-metal 3d-printed heat shields for fusion reactors[D]. Eindhoven:Technische Universiteit Eindhoven, 2019.
[27] Brackbill J U, Kothe D B, Zemach C. A continuum method for modeling surface tension[J]. Journal of Computational Physics, 1992, 100(2):335-354.
[28] Khodak A, Kessel C, Tillack M. Design and analysis of the liquid metal free-surface divertor cooling system[J]. Fusion Science and Technology, 2019, 75(8):930-938.
[29] Malamataris N A, Vlachogiannis M, Bontozoglou V. Solitary waves on inclined films:flow structure and binary interactions[J]. Physics of Fluids, 2002, 14(3):1082-1094.
