欢迎访问中国科学院大学学报,今天是

中国科学院大学学报 ›› 2005, Vol. 22 ›› Issue (3): 292-302.DOI: 10.7523/j.issn.2095-6134.2005.3.006

• 论文 • 上一篇    下一篇

广义应变花方法及其在川滇地区地应变率场计算中的应用

朱守彪1, 石耀霖2   

  1. 1. 北京大学地球物理系计算地球动力学实验室, 北京 100871;
    2. 中国科学院研究生院计算地球动力学实验室, 北京 100049
  • 收稿日期:2004-09-16 修回日期:2004-12-06 发布日期:2005-05-15
  • 基金资助:

    国家自然科学基金重点项目(40234042);地震科学联合基金项目(103016)资助

General Strain Rosette Method and its Application to the Computation of Geo-Strain Rate in Chinese Sichuan-Yunnan Area

ZHU Shou-Biao1, SHI Yao-Lin2   

  1. 1. Department of Geophysics, Peking University, Beijing 100871, China;
    2. Laboratory of Computational Geodynamics, Graduate School of the Chinese Academy of Sciences, Beijing 100049, China
  • Received:2004-09-16 Revised:2004-12-06 Published:2005-05-15

摘要:

提出将工程测量中的平面应变花分析方法推广到地球球面上的广义应变花方法;并通过对已知位移和应变场的特例下的数值实验,比较常用的最小二乘配置法和广义应变花方法计算应变的精度.结果显示广义应变花法应变的计算精度比最小二乘配置法高.最后以中国川滇地区为例,利用GPS观测资料计算了地应变率场,并对计算方法和结果进行了分析讨论.

关键词: 广义应变花方法, 最小二乘配置法, GPS观测, 地应变场, 川滇地区

Abstract:

GPS (global positioning system) velocity can be used to calculate the horiwntal strain rate,but it should be done with great care because digital differentiation is involved,which brings about a prominent problem in minimizing the error. In this paper,a general strain rosette method(GSRM) is proposed,in which the plane strain rosette method in engineering is widened to include spherical earth surface. Then the GSRM is compared with the least squares collocation method (LSCM) in specific case by a digital experiment in which displacements and the strain field are known. The result shows that the accuracy of strain rate computed by GSRM is higher than that of L SRM.Finally,with Chinese Sichuan-Yunnan area as an example,the strain rate is calculated by GPS data and some discussions of computation methods and results are made.

Key words: GSRM, LSCM, GPS measurements, geo-strain rate field, Sichuan-Yunnan area

中图分类号: