新型纳米复合材料Cu/SiO2的热特性及相变特性的分子动力学研究

doi:10.7523/j.issn.2095-6134.2018.02.015

中国科学院大学学报 ›› 2018, Vol. 35 ›› Issue (2): 248-253.DOI: 10.7523/j.issn.2095-6134.2018.02.015

• 中国工程热物理学会2016年传热年会专栏 • 上一篇下一篇

新型纳米复合材料Cu/SiO₂的热特性及相变特性的分子动力学研究

李静, 廖强

重庆大学低品位能源利用技术及系统教育部重点实验室, 重庆 400044;重庆大学动力工程学院, 重庆 400044

收稿日期:2017-04-18 修回日期:2017-07-05 发布日期:2018-03-15
通讯作者: 李静
基金资助:
国家重点研发计划（2016YFB0601100）和国家自然科学基金（51606017）资助

Thermal properties and phase transition properties of Cu/SiO₂ nanocomposites

LI Jing, LIAO Qiang

Key Laboratory of Low-grade Energy Utilization Technologies and Systems of Ministry of Education, Chongqing University, Chongqing 400044, China;College of Power Engineering, Chongqing University, Chongqing 400044, China

Received:2017-04-18 Revised:2017-07-05 Published:2018-03-15

摘要/Abstract

摘要： 使用相变材料可有效地实现能量的高效和合理利用，从而有助于解决能源与环境问题。提出一种纳米结构复合相变材料，由填充纳米颗粒和纳米孔基材组装而成。主要采用分子动力学模拟，研究纳米金属颗粒、纳米孔基材和复合材料的相变行为及相变热特性，讨论不同尺寸或工况下它们的热特性变化，并进行比较。研究表明，铜纳米颗粒的熔点随尺寸的变大而逐渐升高，且熔点比块材低，比热容比块材高；SiO₂基材不存在固定熔点，而有一个跨度较大的熔化区，各工况下比热容比块料值明显偏小，比热容随其尺寸大小和温度升高而增大。研究表明，Cu/SiO₂复合相变材料的熔点高于Cu颗粒和纳米孔基材，Cu/SiO₂体系增强了结构稳定性。同时，填充Cu纳米颗粒能有效地改善纳米孔基材的储热特性。

关键词: 纳米颗粒, 纳米孔基材, 复合材料, 相变, 热特性

Abstract: Phase-change materials can be used to effectively realize the high efficiency and reasonable utilization of energy. We present a nanocomposite phase-change material, which is assembled mainly with filled nanoparticles and nanoporous substrates. Molecular dynamics method was used to simulate the phase-change behavior and thermal properties of metallic nanoparticles, nanoporous substrate, and composite. Thermal properties of metallic nanoparticles and nanoporous substrate were discussed under different sizes and conditions and compared with the thermal properties of composite materials. The research shows that the melting point of copper nanoparticles increases gradually with size and it is lower than that of bulk copper. Meanwhile, the heat capacity of copper nanoparticles is higher than that of bulk copper. Nanoporous SiO₂ substrate has no fixed melting point but has a large span of the melting zone, and its heat capacity increases with size or temperature and is significantly smaller than that of bulk SiO₂. The results show that the melting points of Cu/SiO₂ composites are higher than those of Cu nanoparticles and substrate, which means that composites enhance the structural stability. Meanwhile, the filled Cu nanoparticles effectively improve the heat storage characteristics of the nanoporous substrate.

Key words: nanoparticle, nanoporous substrate, composite, phase change, thermal properties

中图分类号:

TK124

李静, 廖强. 新型纳米复合材料Cu/SiO₂的热特性及相变特性的分子动力学研究[J]. 中国科学院大学学报, 2018, 35(2): 248-253.

LI Jing, LIAO Qiang. Thermal properties and phase transition properties of Cu/SiO₂ nanocomposites[J]. , 2018, 35(2): 248-253.

参考文献

[1] Xiao X, Zhang P, Li M. Thermal characterization of nitrates and nitrates/expanded graphite mixture phase change materials for solar energy storage[J]. Energ Convers Manage, 2013, 73(73):86-94.
[2] Singh S P, Vijay B. Applications of organic phase change materials for thermal comfort in buildings[J]. Rev Chem Eng, 2014, 30(5):521-538.
[3] Sarier N, Onder E. Organic phase change materials and their textile applications:an overview[J].Thermochimica Acta, 2012, 540(1):7-60.
[4] 冷光辉,蓝志鹏,葛志伟,等.储热材料研究进展[J].储能科学与技术, 2015, 4(2):119-130.
[5] Giro-Paloma J, Konuklu Y, Fernández A I. Preparation and exhaustive characterization of paraffin or palmitic acid microcapsules as novel phase change material[J]. Sol Energy, 2015, 112(112):300-309.
[6] Alkan C, Sari A. Fatty acid/poly (methyl methacrylate) (PMMA) blends as form-stable phase change materials for latent heat thermal energy storage[J]. Sol Energy, 2008, 82(2):118-124.
[7] Zhong L, Zhang X, Luan Y, et al. Preparation and thermal properties of porous heterogeneous composite phase change materials based on molten salts/expanded graphite[J]. Sol Energy 2014, 107(9):63-73.
[8] Song Q, Li Y, Xing J, et al. Thermal stability of composite phase change material microcapsules incorporated with silver nano-particles[J]. Polymer, 2007, 48(11):3317-3323.
[9] Johnston J H, Grindrod J E, Dodds M, et al. Composite nano structured calcium silicate phase change materials for thermal buffering in food packaging[J]. Curr Appl Phys, 2008, 8(3/4):508-511.
[10] Yang H, Feng L, Wang C, et al. Confinement effect of SiO₂ framework on phase change of PEG in shape-stabilized PEG/SiO₂composites[J]. Eur Polym J, 2012, 48(4):803-810.
[11] Zhang L, Shi H, Li W, et al. Structure and thermal performance of poly(ethylene glycol) alkyl ether (Brij)/porous silica (MCM-41) composites as shape-stabilized phase change materials[J]. Thermochim Acta, 2013, 570(9):1-7.
[12] Huang X, Dong W, Wang G, et al. Synthesis of confined Ag nanowires within mesoporous silica via double solvent technique and their catalytic properties[J]. J Colloid Interf Sci, 2011, 359(1):40-46.
[13] Zhou Y, Wang Y, Zhang J H, et al. Hot probe method for measuring thermal conductivity of copper nano-particles/paraffin composite phase change materials[J]. Key Engineering Materials, 2013, 561:428-434.
[14] Bischof C, Hartmann M. Synthesis and characterization of ruthenium-containing MCM-41 and MCM-48 mesoporous materials[C]//Treacy M M J, Marcus B K, Bisher M E, et al. Proceedings of the 12th International Zeolite Conference. Warrendale, PA:Materials Research Society, 1999:809-816.
[15] Adhyapak P V, Karandikar P, Vijayamohanan K, et al. Syhthesis of Silver Nanowires inside Mesoporous MCM-41 Host[J]. Mater Lett, 2004, 58(58):1168-1171.
[16] Ciuparu D, Chen Y, Lim S, et al. Uniform-diameter single-walled carbon nanotubes catalytically grown in cobalt-incorporated MCM-41[J]. J Phys Chem B, 2004, 108(2):503-507.
[17] Lai S L, Carlsson J R A, Allen L H. Melting point depression of Al clusters generated during the early stages of film growth:nanocalorimetry measurements[J]. Appl phys Lett, 1998, 72(9):1098-1100.
[18] Sun J, Simon S L. The melting behavior of aluminum nanoparticles[J]. Thermochim Acta, 2007, 463(1):32-40.
[19] Alavi S, Thompson D L. Molecular dynamics simulations of the melting of aluminum nanoparticles[J]. J Phys Chem A, 2006, 110(4):1518-1523.

新型纳米复合材料Cu/SiO₂的热特性及相变特性的分子动力学研究

Thermal properties and phase transition properties of Cu/SiO₂ nanocomposites

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

访问统计

联系我们

[1]	冯宇轩, 罗坤, 樊建人. 静电除尘器中纳米颗粒运动与荷电特性[J]. 中国科学院大学学报, 2021, 38(3): 297-305.
[2]	肖亚楠, 周伟, 崔杰, 刘亭亭, 肖灵. 一种LSTM神经网络和卡尔曼滤波相结合的复合材料承载预测方法[J]. 中国科学院大学学报, 2021, 38(3): 374-381.
[3]	赵之端, 刘道银, 马吉亮, 陈晓平. 振动辅助纳米颗粒聚团流化实验研究[J]. 中国科学院大学学报, 2020, 37(2): 204-209.
[4]	蒋笑添, 杨富中. 平行/重合D膜超势，Ooguri-Vafa不变量与类型II弦理论/F理论对偶[J]. 中国科学院大学学报, 2019, 36(5): 590-597.
[5]	赵振兴, 林原胜, 张克龙, 刘洲洋. 海洋摇摆条件下超临界二氧化碳传热特性的数值研究[J]. 中国科学院大学学报, 2018, 35(2): 280-288.
[6]	王鑫, 董传帅, 张晓凌, 岳晓庆, 何利民. 空气-水段塞流冷却传热与相界面分布实验研究[J]. 中国科学院大学学报, 2017, 34(2): 232-236.
[7]	潘俊, 胡中波. 吸附在Au(100)、Au(110)和Au(111)表面的CTAB双分子层的结构和动力学性质的分子模拟[J]. 中国科学院大学学报, 2017, 34(1): 38-49.
[8]	刘子露, 马家海. 水体中天然有机质在有限光照下还原三价金[J]. 中国科学院大学学报, 2016, 33(6): 748-752.
[9]	苏国萍, 张建丽, 周洪光, 杜小泽, 唐大伟. 板式蒸发器冷凝侧传热及压降性能实验研究[J]. 中国科学院大学学报, 2015, 32(3): 295-300.
[10]	李帆, 倪明玖, 李骥. 微尺度瞬态气泡生长及湮灭的数值模拟[J]. 中国科学院大学学报, 2015, 32(1): 31-37.
[11]	张元勋杨传俊陆文忠杨永兴张桂林李燕. 室内气溶胶纳米颗粒物的粒径分布特征研究[J]. 中国科学院大学学报, 2007, 24(5): 705-709.
[12]	颜晓虹; 胡学功; 赵耀华. 微槽群相变式微冷系统的换热特性实验[J]. 中国科学院大学学报, 2006, 23(3): 313-316.
[13]	于剑, 褚君浩, 汤定元. 低维结构铁电材料光电性能和铁电薄膜红外焦平面列阵器件物理研究(英文)[J]. 中国科学院大学学报, 2003, 20(2): 254-259.
[14]	白凤武, 卢文强. 对流换热边界条件下球体内固液相变过程移动热源法求解[J]. 中国科学院大学学报, 2003, 20(1): 13-21.
[15]	韩龙, 卢文强. 轴对称有无相变导热问题的双倒易边界元模拟[J]. 中国科学院大学学报, 2001, 18(1): 31-36.