Welcome to Journal of University of Chinese Academy of Sciences,Today is
Research Articles

An airborne SAR motion compensation algorithm based on array scanning and its implementation

  • LI Xin-Wei ,
  • ZHANG Ping ,
  • ZHU Lei
Expand
  • 1. Institute of Electronics, Chinese Academy of Sciences, Beijing 100190, China;
    2. Graduate University, Chinese Academy of Sciences, Beijing 100190, China;
    3. Army Aviation Department of General Staff Headquarters of the PLA, Beijing 100012, China

Received date: 2009-03-13

  Revised date: 2009-09-16

  Online published: 2010-01-15

Abstract

Phased array radar is the main direction in the development of airborne SAR, and the motion compensation system is essential to the airborne SAR system. By deploying the coordinate mapping method, the target beam under the earth coordinate system is mapped into the antenna platform coordinate system and converted to the antenna array element phase shift which controls the beam. The airborne SAR motion compensation is then implemented. The algorithm is implemented by using DSP and FPGA. The experimental results show that the designed hardware and software are reliable.

Cite this article

LI Xin-Wei , ZHANG Ping , ZHU Lei . An airborne SAR motion compensation algorithm based on array scanning and its implementation[J]. Journal of University of Chinese Academy of Sciences, 2010 , 27(1) : 70 -75 . DOI: 10.7523/j.issn.2095-6134.2010.1.010

References


[1] 韩传钊,文江平.合成孔径雷达——系统与信号处理
[M].北京:电子工业出版社,2006:9-18.

[2] Horrell J M,knight A, Inggs M R.Motion compensation for airborne SAR //IEEE COMSIG’94 .1994:128-131.

[3] 丁鹭飞,耿富录.雷达原理
[M].北京:西安电子科技大学出版社,2005:209-220.

[4] 张明友,汪学刚.雷达系统
[M].北京:电子工业出版社,2006:135-188.

[5] 陆 岷.机载合成孔径雷达天线稳定平台研究 .北京:中国科学院,2006.

[6] Lv J Y, Zhang X L, Lei H. Realization of two antenna configurations for airborne SAR
[J]. Systems Engineering and Electronics, 2006,28(11):1664-1667(in Chinese). 吕继宇,张绚丽,雷 宏.机载合成孔径雷达两种天线配置的实现
[J].系统工程与电子技术,2006,28(11):1664-1667.

[7] 刘书明,苏 涛,罗军辉.TigerSHARC DSP应用系统设计
[M].北京:电子工业出版社,2004:249-266.

Outlines

/