Journal of University of Chinese Academy of Sciences >
IP Orbit Feedback System Design for BEPC Ⅱ
Received date: 2004-07-20
Revised date: 2004-09-07
Online published: 2005-07-15
Supported by
supported by National Foundation of Natural Sciences of China(10375076A050501)
This paper describes the design of IP orbit feedback system for BEPCII.In the BEPCII the electron and positron beams circulate in the separate rings and collide only at the southern interaction point (IP)with a crossing angle, thus an IP orbit feedback system based on the beam-beam deflection technique is necessary for maintaining an optimum beam collision condition at the IP.Moreover, in order to measure the positions of both positron and electron in the IP at the same time, two special BPMs with 8-button electrodes will be installed at the both side of interaction point.The working principle of the special BPM and the simulation results with finite element method are also described in this paper.
CAO Jian-She , MA Li , Ren-XianYUAN . IP Orbit Feedback System Design for BEPC Ⅱ[J]. Journal of University of Chinese Academy of Sciences, 2005 , 22(4) : 411 -415 . DOI: 10.7523/j.issn.2095-6134.2005.4.003
[1] Funakoshi Y, Akai K, Akasaka N, et al. First beam colli sion in the KEKB.In :Proceedings of the 1999 Particle Accelerator Conference. New York,1999
[2] Akai K, Akasaka N, Enomoto A, et al. Beam-beam performance and luminosity optimization at KEKB
[3] Yu CH. Beam physics issues of BEPCII IR.In :2004 Workshop on BEPCII Interaction Region.2004
[4] Tejima M, Masuzawa M, Tobiyama M, et al. Special beam position monitor with 8-button Electrodes for the KEKB interact ion region. In :Proceedings of EPAC 2002.Paris, 2002
[5] Kotaro Satoh. Det ection of the position of two beams with a common BPM.In :Proceedings of the 1999 Parti cle Accelerator Conference.New York,1999
/
| 〈 |
|
〉 |