Journal of University of Chinese Academy of Sciences >
Experimental investigation of influences of primary nozzle exit position on ejector performance
Received date: 2015-03-13
Revised date: 2015-07-07
Online published: 2016-03-15
The primary nozzle exit position (NXP) is one of the important geometrical factors affecting the ejector performance. In the present study, the ejector performance was investigated experimentally for getting the changing rules of the ejector performance with different NXPs and working conditions. The results show that the NXP has little influence on the critical pressure, but has obvious influence on entrainment ratio. The entrainment ratio first increases and then decreases with NXP. Both the two-phase and single-phase ejectors have their respective optimum NXPs. The optimum NXP increases with the water mass flowrate of the low-pressure fluent. The optimum NXP is 2.8 mm in single-phase operation while it becomes 3.6 mm when the water mass flowrate of the low-pressure fluent is 0.07 kg/min.
Key words： ejector; NXP; entrainment ratio; critical back pressure
CHEN Weixiong , CHEN Huiqiang , SHI Chaoyin , WANG Yingchun , CHONG Daotong , YAN Junjie . Experimental investigation of influences of primary nozzle exit position on ejector performance[J]. Journal of University of Chinese Academy of Sciences, 2016 , 33(2) : 253 -257 . DOI: 10.7523/j.issn.2095-6134.2016.02.017
[1] Sun D W, Eames I W. Recent developments in the design theories and applications of ejectors:a review[J]. J Inst Energy, 1995, 68(475):65-79.
[2] Chunnanond K, Aphornratana S. Ejectors: applications in refrigeration technology[J]. Renew Sust Energ Rev, 2004, 8(2):129-155.
[3] Keenan J, Neumann E. A simple air ejector[J]. J Appld Mech, 1942, 9(2):A75-A81.
[4] Keenan J H, Neumann E P, Lustwerk F. An investigation of ejector design by analysis and experiment[J]. J Appl Mech-Trans ASME, 1950, 17(3):299-309.
[5] Huang M C, Chen S L. An experimental investigation of ejector performance characteristics in a jet refrigeration system[J]. J Chin Inst Chem Eng, 1996, 27(2):91-100.
[6] Aphornratana S, Eames I W. A small capacity steam-ejector refrigerator: experimental investigation of a system using ejector with movable primary nozzle[J]. Int J Refrig-Rev Int Froid, 1997, 20(5):352-358.
[7] Zhu Y H, Cai W J, Wen C Y, et al. Numerical investigation of geometry parameters for design of high performance ejectors[J]. Appl Therm Eng, 2009, 29(5/6):898-905.
[8] Chen W X, Chong D T, Yan J J, et al. The numerical analysis of the effect of geometrical factors on natural gas ejector performance[J]. Appl Therm Eng, 2013, 59(1/2):21-29.
[9] 杨燕勤, 安志强, 经树栋. 喉嘴距、面积比和引射压力对喷射器性能影响的研究[J]. 化工装备技术, 2006, 27(1):68-72.
[10] 龙新平, 程茜, 韩宁,等. 射流泵最佳喉嘴距的数值模拟[J]. 核动力工程, 2008, 29(1):35-38.
[11] 王秀会, 赵军友, 左鹏,等. 喉嘴距对喷射引流器性能影响试验研究[J]. 石油矿场机械, 2014, (10):35-38.
/
| 〈 |
|
〉 |