Journal of University of Chinese Academy of Sciences >
Mechanical analysis of FCI under high temperature and MHD flow impact
Received date: 2015-03-27
Revised date: 2015-05-08
Online published: 2016-07-15
In the ITER project, flow channel insert (FCI) serves as an indispensable electrical and thermal insulator.Mechanical behaviors of this component are affected by magneto-thermo-fluid-structure coupled fields.In this work, numerical investigations using finite volume method and finite element method were carried out to study flow pattern, heat transfer, and structural safety factors in the blanket module.Detailed stress analysis of FCI and influences caused by thermal conductivity were presented.Results show that FCI is basically safe considering through thickness stress and in-plane compressive stress.However, the in-plane tensile stress and shear stress at edges are close to the material limit.Besides, FCI with good thermal insulating ability will lead to high outlet temperature of the flow and can well protect the first wall from bulk flow heat leakage.However, the temperature gradient and thermal stress in FCI will increase in this case.
Key words： multi-physics fields; blanket module; FCI; thermal stress; FSI
LIU Jianjian , LI Mingjian , CHEN Long , NI Mingjiu , ZHANG Nianmei . Mechanical analysis of FCI under high temperature and MHD flow impact[J]. Journal of University of Chinese Academy of Sciences, 2016 , 33(4) : 462 -467 . DOI: 10.7523/j.issn.2095-6134.2016.04.005
[1] Holtkamp N.An overview of the ITER project[J].Fusion Engineering and Design, 2007,82: 427-434.
[2] Wong C P C, Abdou M, Dagher M, et al.An overview of the US DCLL ITER-TBM program[J].Fusion Engineering and Design, 2010,85: 1 129-1 132.
[3] Smolentsev S, Moreau R, Bühler L, et al.MHD thermofluid issues of liquid-metal blankets: phenomena and advances[J].Fusion Engineering and Design, 2010,85: 1 196-1 205.
[4] Wang H, Tang C.Preliminary analysis of liquid LiPb MHD flow and pressure drop in DWT blanket of FDS-I[J].Fusion Engineering and Design, 2012,87: 1 501-1 505.
[5] Smolentsev S, Morley N B, Wong C, et al.MHD and heat transfer considerations for the US DCLL blanket for DEMO and ITER TBM[J].Fusion Engineering and Design, 2008,83: 1 788-1 791.
[6] Vitkovsky I, Golovanov M, Divavin V, et al.Neutronic, thermal-hydraulic and stress analysis of RF lithium cooled test blanket module for ITER[J].Fusion Engineering and Design, 2000,49: 703-707.
[7] Sharafat S, Aoyama A, Morley N, et al.Development status of a SiC-foam based flow channel insert for a US-ITER DCLL TBM[J].Fusion Science and Technology, 2009,56: 883.
[8] Sharafat S, Aoyama A, Ghoniem N, et al.Heat testing of a prototypical SiC-foam-based flow channel insert[J].Plasma Science, IEEE Transactions on, 2010,38: 2 993-2 998.
[9] Ying A, Abdou M, Zhang H, et al.Progress on an integrated multi-physics simulation predictive capability for plasma chamber nuclear components[J].Fusion Engineering and Design, 2010,85: 1 681-1 688.
[10] Smolentsev S, Morley N, Abdou M.Magnetohydrodynamic and thermal issues of the SiC~ f/SiC flow channel insert[J].Fusion Science and Technology, 2006,50: 107-119.
[11] Ni M J, Munipalli R, Morley N B, et al.A current density conservative scheme for incompressible MHD flows at a low magnetic Reynolds number.Part I: On a rectangular collocated grid system[J].Journal of Computational Physics, 2007,227: 174-204.
[12] Ni M J, Munipalli R, Huang P, et al.A current density conservative scheme for incompressible MHD flows at a low magnetic Reynolds number.Part II: On an arbitrary collocated mesh[J].Journal of Computational Physics, 2007,227: 205-228.
[13] Ni M J, Li J F.A consistent and conservative scheme for incompressible MHD flows at a low magnetic Reynolds number.Part III: On a staggered mesh[J].Journal of Computational Physics, 2012,231: 281-298.
[14] Aiello G, Giancarli L, Golfier H, et al.Modeling of mechanical behavior and design criteria for SiCf/SiC composite structures in fusion reactors[J].Fusion Engineering and Design, 2003,65: 77-88.
[15] Riccardi B, Fenici P, Frias Rebelo A, et al.Status of the European R&D activities on SiCf/SiC composites for fusion reactors[J].Fusion Engineering and Design, 2000,51: 11-22.
/
| 〈 |
|
〉 |