Welcome to Journal of University of Chinese Academy of Sciences,Today is

Study on heterogeneity of pore structure to permeability by MRT LBM

  • MA Bin ,
  • SHI Lin ,
  • HUANG Chao ,
  • XU Qianghui
Expand
  • 1. School of Mechanical Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China;
    2. Insitute of Engineering Thermophysics, Department of Energy and Power Engineering, Tsinghua University, Beijing 100081, China

Received date: 2017-05-02

  Revised date: 2017-09-25

  Online published: 2018-03-15

Abstract

Porosity and permeability are very important characters of a porous media.In this work, MRT LBM was used to study the pore structure influence on permeability and the porosity loss influence on permeability loss. Our simulation results are shown as follows. If there are some factors which cause even decreasing of porosity, such as that of depositing, sediment, and coking, the scope of permeability loss is larger than that of porosity loss. In same-porosity-different-structure (SPDS) porous media, there are extraordinary differences in permeability depending on their own pore structures.A larger ratio of max throat length to min throat length leads to a smaller permeability,and a larger tortuosity leads to a smaller permeability.

Cite this article

MA Bin , SHI Lin , HUANG Chao , XU Qianghui . Study on heterogeneity of pore structure to permeability by MRT LBM[J]. Journal of University of Chinese Academy of Sciences, 2018 , 35(2) : 193 -199 . DOI: 10.7523/j.issn.2095-6134.2018.02.007

References

[1] Ergun S. Fluid flow through packed columns[J]. Chemical Engineering Progress, 1952, 48:89-94.
[2] Carman P C. Flow of gases through porous media[J]. Science, 1956, 124:1254-1255.
[3] Wang J Q, Zhao J F, Zhan Y, et al. Analysis of the effect of particle size on permeability in hydrate-bearing porous media using pore network models combined with CT[J]. Fuel, 2016,163:34-40.
[4] Gao Y, Zhang X X, Ramae P, et al. Calculating the anisotropic permeability of porous media using the lattice boltzmann method and X-ray computed tomography[J]. Transport Porous Media 2012, 92:457-472.
[5] Maarten V. Porosity, permeability and 3D fracture network characterization of dolomite reservoir rock samples[J]. Journal of Petroleum Science and Engineering, 2015, 127:270-285.
[6] 查露,栗晶,曹传胜,等. 三维颗粒群沉降的格子Boltzmann模拟[J]. 中国科学院大学学报, 2016, 33(2):240-246.
[7] Schaaf S A, Chambre P L. Flow of rarefied gases[M]. Aiche Journal, 2010, 8(3):293-297.
[8] Pan C, Luo L S, Miller CT. An evaluation of lattice boltzmann scheme for porous medium flow simulation[J]. Computers & Fluids, 2006, 35:898-909.
[9] Cho H J, Jeong N, Sung H J. Permeability of microscale fibrous porous media using the lattice Boltzmann method[J]. International Journal of Heat and Fluid Flow, 2013, 44:435-443.
[10] Cho H J, Jeong N, Sung H J. Permeability of microscale fibrous porous media using the lattice Boltzmann method[J]. International Journal of Heat & Fluid Flow, 2013, 44(12):435-443.
[11] Zou Q, He X. On pressure and velocity boundary conditions for the lattice Boltzmann BGK model[J]. Physics of Fluids 1997, 9:1591-1597.
[12] Ghassemi A, Pak A. Pore scale study of permeability and tortuosity for flow through particulate media using Lattice Boltzmann method[J]. International Journal for Numerical and Analytical Methods in Geomechanics, 2011, 35:886-899.
[13] Bahman S, Pak A. Numerical investigation of the effects of porosity and tortuosity on soil permeability using coupled three-dimensional discrete-element method and lattice Boltzmann method[J]. Physical Review E, 2015, 91:053301.
Outlines

/