In this study, effects of longitudinal vortex generator configurations (Case A-F) on the heat transfer and flow friction characteristics in a rectangular channel are investigated using numerical method. The results show that longitudinal vortex generator enhances the heat transfer performance, compared with the smooth channel. The field synergy principle analyses indicate that the intersection angles between velocity and temperature gradient of all longitudinal vortex generator configurations are smaller than that of smooth channel, and the comparison results show that at the same Reynolds number the smaller synergy angle the larger the Nusselt number is completely consistent with the field synergy principle. Comparisons of the performance evaluation parameter, JF factor, indicate that Case F has the best overall heat transfer performance and that Case F brings about more enhancement of heat transfer at a modest expense of the additional pressure. Therefore, Case F is a suitable configuration for enhancing the overall heat transfer performance for channels.
TANG Linghong
,
ZENG Min
. Flow and heat transfer characteristics in a rectangular channel with vortex generators[J]. Journal of University of Chinese Academy of Sciences, 2018
, 35(2)
: 240
-247
.
DOI: 10.7523/j.issn.2095-6134.2018.02.014
[1] Torri K, Kwak K M, Nishino K. Heat transfer enhancement accompanying pressure-loss reduction with winglet-type vortex generators for fin-tube heat exchangers[J]. International Journal of Heat and Mass Transfer, 2002, 45(18):3795-3801.
[2] 王令, 陈秋炀, 曾敏, 等. 矩形窄通道内带纵向涡发生器的传热强化[J]. 化工学报, 2006, 57(11):2549-2553.
[3] Wang Q W, Chen Q Y, Wang L. Experimental study of heat transfer enhancement in narrow rectangular channel with longitudinal vortex generators[J]. Nuclear Engineering and Design, 2007, 237(7):686-693.
[4] Chen C, Teng J T, Cheng C H, et al. A study on fluid flow and heat transfer in rectangular microchannels with various longitudinal vortex generators[J]. International Journal of Heat and Mass Transfer, 2014, 69:203-214.
[5] Ebrahimi A, Roohi E, Kheradmand S. Numerical study of liquid flow and heat transfer in rectangular microchannel with longitudinal vortex generators[J]. Applied Thermal Engineering, 2015, 78:576-583.
[6] 何雅玲, 楚攀, 谢涛. 纵向涡发生器在管翅式换热器中的应用及优化[J]. 化工学报, 2012, 63(3):746-760.
[7] Wu J M, Zhang H, Yan CH, et al. Experimental study on the performance of a novel fin-tube air heat exchanger with punched longitudinal vortex generator[J]. Energy Conversion and Management, 2012, 57(1):42-48.
[8] 张强, 王良璧. 通道内矩形涡对涡发生器强化换热的数值研究[J]. 兰州交通大学学报, 2014, 33(6):110-114.
[9] Tang L H, Tan S C, Gao P Z, et al. Parameters optimization of fin-and-tube heat exchanger with a novel vortex generator fin by Taguchi method[J]. Heat Transfer Engineering, 2016, 37(3/4):369-381.
[10] Tian L T, He Y L, Lei Y G, et al. Numerical study of fluid flow and heat transfer in a flat-plate channel with longitudinal vortex generators by applying field synergy principle analysis[J]. International Communications in Heat and Mass Transfer, 2009, 36:111-120.
[11] 唐凌虹, 谭思超, 高璞珍. 纵向涡发生器作用下矩形通道内流动换热性能研究[J]. 原子能科学技术, 2014, 48(5):812-817.
[12] 黄军. 纵向涡作用下窄间隙矩形通道内单相和沸腾流动换热特性机理研究[D]. 西安:西安交通大学, 2009.
[13] Bejan A. Convective heat transfer[M]. New York:John Wiley & Son Inc, 1995.
[14] Holman J P. Heat transfer[M]. New York:McGraw-Hill Higher Education, 2010:258.
[15] Guo Z Y, Li D Y, Wang B X. A novel concept for convective heat transfer enhancement[J]. International Journal of Heat and Mass Transfer, 1998, 41(14):2221-2225.
[16] Wu J M, Tao W Q. Numerical study on laminar convection heat transfer in a rectangular channel with longitudinal vortex generator. PART A:Verification of field synergy principle[J]. International Journal of Heat and Mass Transfer, 2008, 51(5/6):1179-1191.
[17] Yun J Y, Lee K S. Influence of design parameters on the heat transfer and flow friction characteristics of the heat transfer with slit fins[J]. International Journal of Heat and Mass Transfer, 2000, 43(14):2529-2539.
