裂隙岩体块体几何识别研究

doi:10.7523/j.issn.2095-6134.2012.1.012

中国科学院大学学报 ›› 2012, Vol. 29 ›› Issue (1): 81-87.DOI: 10.7523/j.issn.2095-6134.2012.1.012

裂隙岩体块体几何识别研究

沈振涯¹, 肖俊¹, 王颖¹, 隋红建²

1. 中国科学院研究生院, 北京 100049;
2. 中国科学院北京分院, 北京 100190

收稿日期:2010-12-02 修回日期:2011-02-24 发布日期:2012-01-15
基金资助:
国家自然科学基金(60772155,60902098,61003275)资助

Study on the geometrical identification method of blocks in fractured rock masses

SHEN Zhen-Ya¹, XIAO Jun¹, WANG Ying¹, SUI Hong-Jian²

1. Graduate University, Chinese Academy of Sciences, Beijing 100049, China;
2. Beijing Branch, Chinese Academy of Sciences, Beijing 100190, China

Received:2010-12-02 Revised:2011-02-24 Published:2012-01-15

摘要/Abstract

摘要：

回顾了块体几何识别研究的发展过程,依据模型的空间维数和切割方法将其分为3个阶段,并分类分析了各个阶段的代表性研究成果.从原理、构建、效率和应用等角度对三维块体全空间识别算法进行比较,归纳出块体识别方法的一般数学描述. 指出了当前三维块体全空间识别存在的问题和进一步研究的方向.

关键词: 块体识别, 块体切割, 关键块体理论, 拓扑, 边界表示法

Abstract:

Development of the geometrical identification method of blocks in fractured rock masses is divided into three stages and the representative research results in each of the stages are analyzed. We compare and analyze the typical three-dimensional whole space block identification methods and give a general mathematical description for these methods. The existing problems and topics which need further research are pointed out.

Key words: block identification, block cutting, key block theory, topology, boundary representation

中图分类号:

TP391.9

沈振涯, 肖俊, 王颖, 隋红建. 裂隙岩体块体几何识别研究[J]. 中国科学院大学学报, 2012, 29(1): 81-87.

SHEN Zhen-Ya, XIAO Jun, WANG Ying, SUI Hong-Jian. Study on the geometrical identification method of blocks in fractured rock masses[J]. , 2012, 29(1): 81-87.

参考文献

[1] Goodman R E, Shi G. Block theory and its application to rock engineering
[M]. Englewood Cliffs, New Jersey: Prentice-hall, Inc, 1985:101-105.

[2] Lin D, Fairhurst C, Starfield A M. Geometrical identification of three-dimensional rock block systems using topological techniques
[J]. International Journal of Rock Mechanics and Mining Science & Geomechanics Abstracts, 1987, 24(6): 331-338.

[3] Ikegawa Y, Hudson J A. A novel automatic identification system for three-dimensional multi-block systems
[J]. Engineering Computations, 1992, 9(2):169-179.

[4] Jing L. Block system construction for three-dimensional discrete element models of fractured rocks
[J]. International Journal of Rock Mechanics and Mining Sciences, 2000, 37(4): 645-659.

[5] Wu A Q, Zhang Q H. Geometric identification of stochastic block in block theory
[J]. Journal of Hydraulic Engineering, 2005, 36(4):426-432 (in Chinese). 邬爱清, 张奇华. 岩石块体理论中三维随机块体几何搜索
[J]. 水利学报, 2005, 36(4): 426-432.

[6] Zhang Q H, Wu A Q. General methodology of spatial block topological identification with stochastic discontinuities cutting
[J]. Chinese Journal of Rock Mechanics and Engineering, 2007, 26(10): 2043-2048 (in Chinese). 张奇华, 邬爱清. 随机结构面切割下的全空间块体拓扑搜索一般方法
[J]. 岩石力学与工程学报, 2007, 26(10): 2043-2048.

[7] Wang W M, Chen S H. Automatic identification method for three dimensional rock block systems
[J]. Journal of Wuhan University of Hydraulic and Electric Engineering, 1998, 31(5): 51-55(in Chinese). 汪卫明, 陈胜宏. 三维岩石块体系统的自动识别方法
[J]. 武汉水利电力大学学报, 1998, 31(5): 51-55.

[8] Yin D S, Wang W M, Chen S H. Block system's automatic identification method for three dimensional network of random fissures
[J]. Journal of Yangtze River Scientific Research Institute, 2008, 25(5): 72-74 (in Chinese). 殷德胜, 汪卫明, 陈胜宏. 三维岩石随机裂隙网络的块体自动识别
[J]. 长江科学院院报, 2008, 25(5): 72-74.

[9] Cundall P A. Formulation of a three-dimensional distinct element model-Part I. A scheme to detect and represent contacts in system composed of many polyhedral blocks
[J]. International Journal of Rock Mechanics and Mining Science & Geomechanics Abstracts, 1988, 25:107-116.

[10] Hart R, Cundall P A, Lemos J. Formulation of a three-dimensional distinct element model-Part II. Mechanical calculations for motion and interaction of a system composed of many polyhedral blocks
[J]. International Journal of Rock Mechanics and Mining Science & Geomechanics Abstracts, 1988, 25:117-125.

[11] Yu Q C, Chen D J, Xue G F, et al. Preliminary study on general block method of fractured rock mass
[J]. Hydrogeology and Engineering Geology, 2005, 6:42-48 (in Chinese). 于青春, 陈德基, 薛果夫,等. 裂隙岩体一般块体理论初步
[J]. 水文地质工程地质, 2005, 6:42-48.

[12] 于青春, 薛果夫, 陈德基. 裂隙岩体一般块体理论
[M]. 北京: 中国水利水电出版社, 2007.

[13] Wang S H, Yang Y, Wang Y, et al. Numerical method of key block identification for jointed rock tunnel construction
[J]. Chinese Journal of Underground Space and Engineering, 2009, 5(5):976-979,995 (in Chinese). 王述红, 杨勇, 王洋,等. 裂隙岩体隧道施工关键块体识别数值方法
[J]. 地下空间与工程学报, 2009, 5(5):976-979,995.

[14] 石根华. 岩体稳定分析的赤平投影方法
[J]. 中国科学, 1977 (3): 260-270.

[15] 石根华. 岩体稳定分析的几何方法
[J]. 中国科学, 1981(4): 487-495.

[16] Warburton P M. Application of a new computer model for reconstructing blocky rock geometry analysis single block stability and identifying keystones //Proc 5th Int Cong on Rock Mech. Melbourne, Australian, 1973: F225-F230.

[17] Lin D, Fairhurst C. Static analysis of the stability of three-dimensional blocky systems around excavations in rock
[J]. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 1988, 25(3): 139-147.

[18] Jing L, Stephansson O. Topological identification of block assemblages for jointed rock masses
[J]. International Journal of Rock Mechanics and Mining Science & Geomechanics Abstracts, 1994, 31(2):163-172.

[19] Jing L, Stephansson O. Identification of block topology for jointed rock masses using boundary operators //Proceedings of the International ISRM Symposium on Rock Mechanics. Santiago, Chile, 1994, I: 19-29.

[20] Shi G H. Producing joint polygons, cutting joint blocks and finding key blocks for general free surfaces
[J]. Chinese Journal of Rock Mechanics and Engineering, 2006,25(11): 2161-2170.

[21] Heliot D. Generating a blocky rock mass
[J]. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts, 1988, 25(3):127-138.

[22] Wang Y J, Liu L F. Formulation of a three dimensional discrete element model TRUDEC system
[J]. Chinese Journal of Rock Mechanics and Engineering, 1996, 15(3): 201-210(in Chinese). 王泳嘉, 刘连峰. 三维离散单元法软件系统TRUDEC的研制
[J]. 岩石力学与工程学报, 1996, 15(3): 201-210.

[23] Hwang J. Kinematics and stability analysis method of rock blocks considering finite discontinuity persistence
[J]. KSCE Journal of Civil Engineering, 2004, 8(4): 397-402.

[24] 彭校初, 冯树荣. 三维块体理论在岩体工程中的应用 //第一届中国水利水电岩土力学与工程学术讨论会论文集(上集). 第一届中国水利水电岩土力学与工程学术讨论会, 昆明, 2006: 165-168.

[25] Zhang Y, Xiao M, Chen J. A new methodology for block identification and its application in a large scale underground cavern complex
[J]. Tunnelling and Underground Space Technology, 2010, 25(2): 168-180.

[26] 石根华. 数值流形方法与非连续变形分析
[M]. 裴觉民,译.北京: 清华大学出版社, 1997:134-137.

裂隙岩体块体几何识别研究

Study on the geometrical identification method of blocks in fractured rock masses

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 3

编辑推荐

Metrics

本文评价

访问统计

联系我们

[1]	金玥苏, 苏刚. 光调控的Shastry-Sutherland格子上电子的体态-边缘态对应[J]. 中国科学院大学学报, 2019, 36(5): 581-589.
[2]	罗刚, 赵亚伟, 王泳. 基于复杂网络理论的担保网络风险传播模式[J]. 中国科学院大学学报, 2015, 32(6): 836-842.
[3]	孟令显, 杨富中. 紧致Calabi-Yau流形模空间上的模形式[J]. 中国科学院大学学报, 2011, 28(6): 722-727.