基于超导体磁穿透深度的测温实验装置设计*

doi:10.7523/j.ucas.2023.020

中国科学院大学学报

基于超导体磁穿透深度的测温实验装置设计^*

朱昌阳¹, 边星^1,2, 王金阵^1,3, 刘捷^1†

1 中国科学院大学工程科学学院,北京100049;
2 中国科学院力学研究所,北京100190;
3 中国科学院理化技术研究所,北京 100190

收稿日期:2022-12-12 修回日期:2023-03-13 发布日期:2023-03-21
通讯作者: ^†E-mail: nauty@ucas.ac.cn
基金资助:
^*中央高校基本科研业务费专项资金资助

Design of low temperature measurement experimental device based on superconductor magnetic penetration depth

ZHU Changyang¹, BIAN Xing^1,2, WANG Jinzhen^1,3, LIU Jie¹

1 College of Engineering Sciences, University of Chinese Academy of Sciences, Beijing 100049, China;
2 Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, China;
3 Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China

Received:2022-12-12 Revised:2023-03-13 Published:2023-03-21

摘要/Abstract

摘要： 外界磁场进入超导体的磁穿透深度随超导体的温度变化而变化,特别是在超导转变温度附近,穿透深度变化尤为剧烈。探测穿透深度变化可实现对温度变化的高分辨率测量,是重要的深低温温度测量原理。基于该基本原理,本文研究了一种利用超导体穿透深度变化、闭合超导回路磁通量子化和超导量子干涉器件（SQUID）的温度测量方案,进行了理论分析和仿真,有望在液氦温区实现nK/Hz量级的温度分辨率,并给出了具体的实验装置设计。该方法分辨率高且不引入额外热流,不需要外部持续的电流激励,可通过在被测物体表面镀超导膜等方法消除传统温度测量方法中温度计的自热效应、接触热阻等对测量的不利影响,对10K以下温区的温度测量实验与应用有重要的参考意义。

关键词: 磁穿透深度, 超导量子干涉器件, 低温温度测量

Abstract: The magnetic penetration depth of the external magnetic field into the superconductor varies with the temperature of the superconductor, especially near the superconducting transition temperature, the penetration depth changes dramatically. Detecting the change of the penetration depth can achieve high-resolution measurement of temperature changes, which is an important principle of deep and low temperature measurement. Based on this basic principle, this work studies a temperature measurement scheme using the change of superconductor penetration depth, the quantization of closed superconducting loop magnetic flux and the superconducting quantum interference device (SQUID), carries out theoretical analysis and simulation, which is expected to achieve a temperature resolution of nK/Hz in the liquid helium temperature region, and gives the specific experimental device design. This method has high resolution, does not introduce additional heat flow, and does not require continuous current excitation. It can greatly reduce the adverse effects of the traditional temperature measurement caused by thermometer self-heating effect and contact thermal resistance, etc. by plating superconducting film on the surface of the object, which is beneficial to the temperature measurement experiments and applications below 10K.

Key words: Magnetic penetration depth, Superconducting quantum interference device, Low temperature measurement

中图分类号:

TK124

朱昌阳, 边星, 王金阵, 刘捷. 基于超导体磁穿透深度的测温实验装置设计^*[J]. 中国科学院大学学报, DOI: 10.7523/j.ucas.2023.020.

ZHU Changyang, BIAN Xing, WANG Jinzhen, LIU Jie. Design of low temperature measurement experimental device based on superconductor magnetic penetration depth[J]. Journal of University of Chinese Academy of Sciences, DOI: 10.7523/j.ucas.2023.020.

参考文献

[1] Ventura G, Risegari L.Temperature Scales and Temperature Fixed Points[M]// The Art of Cryogenics: Low-Temperature Experimental Techniques. Elsevier, 2008. DOI: https://doi.org/10.1016/B978-008044479-6.50009-1.
[2] Moldover M R, Tew W L, Yoon H W.Advances in thermometry[J]. Nature Physics, 2016, 12(1): 7-11.DOI: 10.1038/nphys3618.
[3] Moldover M R, Gavioso R M, Mehl J B, et al.Acoustic gas thermometry[J]. Metrologia, 2014, 51(1): R1-R19.DOI: 10.1088/0026-1394/51/1/r1.
[4] Gugan D, Michel G W.Dielectric constant gas thermometry from 4.2 to 27.1 K[J]. Metrologia, 1980, 16(4): 149-167.DOI: 10.1088/0026-1394/16/4/002.
[5] Kirste A, Engert J.A SQUID-based primary noise thermometer for low-temperature metrology[J]. Philosophical Transactions.Series A, Mathematical, Physical, and Engineering Sciences, 2016, 374(2064): 20150050. DOI:10.1098/rsta.2015.0050.
[6] DiPirro M J, Tuttle J G, Shirron P J. Development of a high-resolution penetration depth thermometer [M]// Advances in Cryogenic Engineering. Boston, MA: Springer.1996: 1723-1730. 10.1007/978-1-4613-0373-2_216.
[7] McDonald D G. Novel superconducting thermometer for bolometric applications[J]. Applied Physics Letters, 1987, 50(12): 775-777.DOI: 10.1063/1.98042.
[8] Peruzzi A, Bosma R, de Groot M J, et al. ⁴He interpolating constant-volume gas thermometry in the range 3.0 K to 24.5561 K[J]. Metrologia, 2010, 47(3): 325-333.DOI: 10.1088/0026-1394/47/3/024.
[9] Pitre L, Moldover M R, Tew W L.Acoustic thermometry: new results from 273 K to 77 K and progress towards 4 K[J]. Metrologia, 2006, 43(1): 142-162.DOI: 10.1088/0026-1394/43/1/020.
[10] Greywall D S.3He melting-curve thermometry at millikelvin temperatures[J]. Physical Review B, Condensed Matter 1985, 31(5): 2675-2683.DOI: 10.1103/physrevb.31.2675.
[11] Lusher C P, Li J Y, Maidanov V A, et al.Current sensing noise thermometry using a low T_c DC SQUID preamplifier[J]. Measurement Science and Technology, 2001, 12(1): 1-15.DOI: 10.1088/0957-0233/12/1/301.
[12] Merlone A, Moro F, Zandt T, et al.Construction and start-up of a large-volume thermostat for dielectric-constant gas thermometry[J]. International Journal of Thermophysics, 2010, 31(7): 1386-1395.DOI: 10.1007/s10765-010-0708-x.
[13] Sauvageau J E, McDonald D G. Superconducting kinetic inductance bolometer[J]. IEEE Transactions on Magnetics, 1989, 25(2): 1331-1334.DOI: 10.1109/20.92541.
[14] Shirron P J, DiPirro M J. Concept for a high-resolution thermometer utilizing the temperature dependence of the magnetic penetration depth[J]. IEEE Transactions on Applied Superconductivity, 1993, 3(1): 2140-2143.DOI: 10.1109/77.233925.
[15] Meissner W.Messungen mit hilfe von flüssigem helium. VI[J]. Zeitschrift Für Physik, 1930, 60(3): 181-183.DOI: 10.1007/BF01339823.
[16] Chan H A.Null test of the gravitational inverse square law with a superconducting gravity gradiometer [D]. College Park, MD, USA: University of Maryland, College Park, 1982
[17] Wasserbäch W.Electron-phonon scattering and low-temperature thermal conductivity of niobium and tantalum single crystals[J]. Physica Status Solidi (b) Research, 1985, 127(2): 481-492.DOI: 10.1002/pssb.2221270207.
[18] Bodryakov V Y, Bashkatov A N.Heat capacity of tantalum in the normal and superconducting states: identification of the contributions[J]. Russian Metallurgy, 2013, (9): 671-675.DOI: 10.1134/s0036029513090048.
[19] Touloukian Y S.Thermal expansion: metallic elements and alloys[M]. New York: IFI/Plenum, 1975.
[20] 王迪昌,廉曾妍,王沛,等.界面平均温度和压力对dd5和1cr11ni2w2mov材料接触热阻影响的实验研究 [J/OL].中国科学院大学学报,2022. DOI:10.7523/j.ucas.2022.044
[21] Zhang H H, Han S Y, Fan L F.Modeling 2D transient heat conduction problems by the numerical manifold method on Wachspress polygonal elements[J]. Applied Mathematical Modelling, 2017, 48: 607-620.DOI: 10.1016/j.apm.2017.03.043.

基于超导体磁穿透深度的测温实验装置设计^*

Design of low temperature measurement experimental device based on superconductor magnetic penetration depth

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

访问统计

联系我们

[1]	仝家炜, 曹玉会. 内圆柱旋转的Taylor-Couette系统中冷水热对流的数值模拟[J]. 中国科学院大学学报, 2024, 41(2): 176-187.
[2]	陈昭奇, 王增辉. 磁场影响下热电效应对导电管道内液态金属流动特性影响的研究^*[J]. 中国科学院大学学报, 0, (): 2-2.
[3]	蔡志洋, 孟旭, 张登科, 吴曦, 王增辉. 强磁场影响下金属相变传热的MHD效应实验研究^*[J]. 中国科学院大学学报, 0, (): 15-15.
[4]	贾崇熙, 王豪, 刘捷, 卢文强. 伞蜥颈部褶皱自然对流换热的数值模拟研究^*[J]. 中国科学院大学学报, 0, (): 64-64.
[5]	王新越, 李骥. 重力对新型大功率环路热管传热性能影响的实验研究^*[J]. 中国科学院大学学报, 0, (): 60-.
[6]	雷天扬, 孟旭, 王增辉, 倪明玖. 强磁场下液态金属微槽道流动与换热实验研究[J]. 中国科学院大学学报, 2021, 38(4): 459-466.
[7]	宫亚芳, 曹玉会. 衬垫与箱壁间空隙对苹果预冷效果的影响[J]. 中国科学院大学学报, 2021, 38(2): 198-206.
[8]	周鑫, 王宏, 朱恂, 陈蓉, 廖强, 丁玉栋. 液滴撞击凹凸槽道表面液膜的动态演变[J]. 中国科学院大学学报, 2020, 37(2): 255-262.
[9]	肖翾, 马杨, 沈阳, 程永攀, 徐进良. 气泡脱离基板规律的数值模拟[J]. 中国科学院大学学报, 2020, 37(2): 263-267.
[10]	周仲凯, 王增辉, 陈然. 强磁场下液态金属在竖直平板外的自由对流换热[J]. 中国科学院大学学报, 2020, 37(1): 13-19.
[11]	陈然, 王增辉, 倪明玖. 强磁场对导电流体热毛细流动和换热影响的实验研究[J]. 中国科学院大学学报, 2019, 36(1): 25-30.
[12]	石宏岩, 刘捷, 卢文强. 水平紧密接触品字形三圆管自然对流换热的数值模拟[J]. 中国科学院大学学报, 2018, 35(5): 595-601.
[13]	李粲, 王增辉, 贾潇, 倪明玖. 强磁场和电场作用下的液态金属飞溅抑制的实验研究[J]. 中国科学院大学学报, 2018, 35(4): 444-450.
[14]	许国强, 张昊春, 马超, 许玉婷, 张晨旭. 热斗篷结构调控传输过程的绕流偏角特性[J]. 中国科学院大学学报, 2018, 35(2): 209-215.
[15]	刘华, 解向前, 金子程, 夏新林, 艾青, 李东辉. 纳米复合隔热材料高温等效导热系数辨识方法[J]. 中国科学院大学学报, 2018, 35(2): 216-221.