Journal of University of Chinese Academy of Sciences >
Molecular dynamics simulation of thermal transport process of liquid metal
Received date: 2014-01-27
Revised date: 2014-04-18
Online published: 2015-01-15
In order to study the thermal transport process of liquid metal in micro scale, liquid metal flow and heat transfer process between two constant-temperature plates is simulated by using molecular dynamics simulation method. Cu atoms are used in the two plates as different constant-temperature solid walls, and liquid metal Pb is arranged in initial alignment as FCC structure between the two plates. The simulation results show that the liquid metal temperature has a linear distribution between two plates. At different temperatures, thermal transport processes of liquid metal show linear temperature distributions and thermal conductivity of the liquid metal linearly increases with temperature. By exerting gravity acceleration, liquid metal does not show obvious natural convection temperature distribution because boundary resistance and viscous force of liquid metal suppress the natural convection of liquid metal in micro scale.
ZHANG Longyan , WANG Zenghui . Molecular dynamics simulation of thermal transport process of liquid metal[J]. Journal of University of Chinese Academy of Sciences, 2015 , 32(1) : 25 -30 . DOI: 10.7523/j.issn.2095-6134.2015.01.005
[1] Maroo S C, Chung J N. A novel fluid-wall heat transfer model for molecular dynamics simulations[J]. Journal of Nanoparticle Research, 2010,12 (5): 1 913-1 924.
[2] Chen J, Liu C, Liu F, et al. Investigation of solid wall heating by molecular dynamic simulation[J]. Journal of Engineering Thermophysics, 2007, 28(1): 9-11.
[3] Kim B H, Beskok A, Cagin T. Thermal interactions in nanoscale fluid flow: molecular dynamics simulations with solid-liquid interfaces[J]. Microfluid Nanofluidics, 2008, 5(4):551-559.
[4] Kamali R , Kharazmi A. Molecular dynamics simulation of surface roughness effects on nanoscale flows[J]. International Journal of Thermal Sciences, 2011,50(3): 226-232.
[5] Kharea R, Keblinskib P, Yethirajc A. Molecular dynamics simulations of heat and momentum transfer at a solid-fluid interface: Relationship between thermal and velocity slip[J]. International Journal of Heat and Mass Transfer,2006, 49(19/20):3 401-3 407.
[6] Nagayamaa G, Cheng P. Effects of interface wettability on microscale flow by molecular dynamics simulation[J]. International Journal of Heat and Mass Transfer, 2004, 47(3): 501-513.
[7] Xu J, Li Y. Boundary conditions at the solid-liquid surface over the multiscale channel size from nanometer to micron[J]. International Journal of Heat and Mass Transfer,2007, 50(13/14):2 571-2 581.
[8] Yin C Y, Mohamad E H. Simulation of liquid argon flow along a nanochannel: effect of applied force[J]. Fluid Flow and Transport Phenomena Chinese Journal of Chemical Engineering, 2009,17(5): 734-738.
[9] Priezjev N V. Rate-dependent slip boundary conditions for simple fluids[J]. Physical Review E, 2007,75: 051 605.
[10] Yang S. Effects of surface roughness and interface wettability on nanoscale flow in a nanochannel[J]. Microfluidics and Nanofluidics, 2006, 2(6):501-511.
[11] Ziarani A S, Mohamad A A. Effect of wall roughness on the slip of fluid in a microchannel[J]. Nanoscale and Microscale Thermophysical Engineering, 2008,12(2): 154-169.
[12] Maruyama S, Kimura T. A study on thermal resistance over a solid-liquid interface by the molecular dynamics method[J]. Thermal Science and Engineering, 1999,7(1):63-68.
[13] Maroo S C, Chung J N. Molecular dynamic simulation of platinum heater and associated nanoscale liquid argon film evaporation and colloidal adsorption characteristics[J]. Journal of Colloid and Interface Science, 2008,328(1): 134-146.
[14] Li Q b, Liu C. Molecular dynamics simulation of heat transfer with effects of fluid-lattice interactions[J]. International Journal of Heat and Mass Transfer,2012,55(25/26): 8 088-8 092.
[15] Barisik M, Beskok A. Boundary treatment effects on molecular dynamics simulations of interface thermal resistance[J]. Journal of Computational Physics, 2012, 231(23): 7 881-7 892.
[16] Barisik M, Beskok A. Temperature dependence of thermal resistance at the water/silicon interface[J]. International Journal of Thermal Sciences,2014,77:47-54.
[17] Hoyt J J, Garvin J W, Webb III E B, et al. An embedded atom method interatomic potential for the Cu-Pb system[J]. Modelling and Simulation in Materials Science and Engineering, 2003,11(3):287-299.
[18] Belashchenko D K,Kravchunovskaya N E,Ostrovski O,Molecular dynamics calculation of surface tension of liquid metals using the embedded atom model[J]. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 2010, 34: 45-50.
[19] Shi Z Y, Barisik M, Beskok A. Molecular dynamics modeling of thermal resistance at argon-graphite and argon-silver interfaces[J]. International Journal of Thermal Sciences, 2012,59:29-37.
[20] Turan O, Poole R J, Chakraborty N. Influences of boundary conditions on laminar natural convection in rectangular enclosures with differentially heated side walls[J]. International Journal of Heat and Fluid Flow, 2012,33:131-146.
/
| 〈 |
|
〉 |